Oil & Gas

TK.1000.1000

TK.1000.1000

This is the name of the new high torque density motor developed by Phase Motion Control.
Thanks to an optimized electromagnetic design and highest grade NdFeB magnets, in less than a cubic meter (1mt Ø * 1m length) this motor can develop a continuous torque of 100’000 Nm @ 100 rpm (1 MW).

It also allows constant power operation up to 240 rpm. Peak torque can exceed 150’000 Nm.
ATEX certification and robust design allow operation in an aggressive environment.

Power Generation

Direct Drive for machine toolsmain generator axis, pitch and yaw control axes

Direct Drive for machine toolsmain generator axis, pitch and yaw control axes

PMC supplies big DD generators for wind generation system up to 1MW @25rpm. PMC develops big generator with double radial airgap, with thin ring technology, segmented, according to a solution patented from 1990. The generators work in direct drive on the turbine axis at low speed (20÷25rpm) allowing the gear chain overdrive removal.
Dimension: 3,8 mt ext. diam. for few tons.

 

PMC products used on the machine:
Big Torque frameless generator TK series with double axial airgap.

EG3400.X – Power gen.= 1,1MW @25rpm
(Tnom=425kNm @25rpm)
TK.1150.100.x (Tnom=9000Nm @55rpm – Tpeak=16000Nm)
ULTRACTIII – U31007.20.3Rxxxxx (Tnom=60Nm @2000rpm – Tpeak=200Nm)

Power Generation

Large low speed direct drive generators demonstrate lowest mass

Large low speed direct drive generators demonstrate lowest mass

Renewable energy: A number of direct drive PM generators were developed, and are in production, drawing from the Company’s experience in large specialized PM motors and drives.
Generators supplied range from 5 kW in fully packaged format, to frameless units in the 20-75 kW for mini wind power plant, to full size MW class generators in the multi patented double air gap modular technology which allows unprecedented advantage in terms of mass, ease of assembly and efficiency.

 

Additionally, low speed generators are also supplied for mini hydro plants in the 50-200 kW range, for wave energy recovery, and for tidal energy recovery. 
Phase Motion Control activities span all electromechanical and electronic renewable energy fields.

Power Generation

Main generator axis Pitch control

Main generator axis Pitch control

PMC supplies big DD generators for wind generation systems up to 3,3MW @16rpm. PMC develops a big generator with double radial air gap, with thin ring technology, segmented, according to a solution patented from 1990.The generators work in direct drive on the turbine axis at low speed (10÷20rpm) allowing the gear chain overdrive removal.
Dimension: 5,5 ext. diam. for a few tons.

 

PMC products used on the machine:
Big Torque frameless generator TK series with double axial air gap.

EG5500.X – Power gen.= 3,3MW @16rpm (Tnom=2.016kNm @16rpm)
TK.1150.150.x (Tnom=12.500Nm @35rpm – Tpeak=22.000Nm)

All application

We pioneered cooperative design over 15 years ago. We believe that this is the way to create value with our partners:

View all

Electronic motion control is becoming more and more pervasive in all applications:

Automotive

Automotive

Elevator & Ropeways

Elevator & Ropeways

Industrial

Industrial

Telescope

Telescope

Contact us

Do you need more information about our work? Fill out the form below

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply